Herewith the plans for
the Itchy Stick II. Unfortunately I have not created a build instruction but
would be happy to assist you if you wish to build one of these fun models.
The Corex I obtained
from ECO Signage Supplies in Strydom Park at under R10 per 800x600 sheet and
used 3mm for the wings and 2mm for the fuselage.
011 791 0386 – Just
behind Linex Yamaha on Hans Strydom.
Motor is a Turnigy
D2822/14 1450KV with a 7 x 4.5E prop – MAC Models should have a similar motor
for a shade over R120 (Alan 072 344 4486)
Battery is a 3Cell LIPO
(11.1V)
...with a 30Amp ESC –
MAC Models should have for a shade over R130
3 x Servo’s can be
plastic gear Hextronic HXT900 (approx R35) but I prefer the metal gear Corona
CS-939MG (Approx R70) which are available from MAC Models
Wing strut is a 25x5
spruce beam. Control surfaces I splurged on tapered balsa but could be regular
3x20 balsa or Corex.
Don’t forget some sosati
sticks to add stiffness in the tail. Pic attached shows the model with
undercarriage but really doesn’t need it. there is no rudder but you could add
one if you wish.
If you would like further information or assistance drop me an email: spiers@mweb.co.za
Brett
No comments:
Post a Comment